Canon elura20 - Manual (Page 89)

89
E
Editing
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
4. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camera becomes set to playback pause mode.
AUDIO DUB.••AUDIO IN VCR SET UP
( 35)
REW PLAY FF
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
A/V
INSERT
PAUSE SLOW
+ / – /
×2
OFF
POWER
VCR
P.SCAN MO
VIE
REMOTE
Do not connect/disconnect any cables to/from the camera when dubbing audio or
preparing to dub audio.
Preparations
Dubbing
Turn the camera’s POWER dial to VCR and load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
• When you add sound using the built-in microphone make sure not to connect
any cables to the MIC terminal (on the DU-300).
• To use your TV to monitor video, connect the S-video terminal ( 30) or the
A/V terminal (use only the video plug) to your TV. You can monitor the sound
with headphones (
65).
VCR