Canon elura20 - Manual (Page 110)

110
E
Using a Memory Card
(ELURA20 MC only)
Erasing Still Images
SLIDE
SHOW CARD
CARD
This section describes how to erase the still image from the Card Operation
submenu when playing back a single image in CARD PLAY mode. (SINGLE or
ALL)
You can also erase a still image through CARD PHOTO REVIEW (
105) or
File Operation menu ( 106).
Make sure a memory card that has images recorded on it is inserted into the
camera.
1. Select the image you want to erase.
• Use the index screen ( 103) or card jump function ( 103) if necessary
and make sure the image you want to erase fills the display.
• If you use the index screen, press the INDEX SCREEN button after
selecting the image. The image you selected fills the whole display.
2. Open the menu and select CARD OPER.
3. Select IMAGE ERASE.
• CANCEL, SINGLE and ALL settings appear.
• To cancel erasing, select CANCEL and close the menu.
4. Select SINGLE.
• ERASE THIS IMAGE? NO YES appears in the display.
5. Select YES and press the SELECT dial in.
• The image is erased and the previous image appears.
• To erase another single image, move to that image with the CARD +/–
buttons, and select YES.
• If the image you are trying to erase is a protected image, YES appears in
purple and is unselectable.
• If you select NO, you return to step 4.
6. Close the menu.
To erase images one at a time
IMAGE ERASE CARD OPER.
( 35)
CARD
PLAY