Great Plains SS1700 Operator Manual - Manual (Page 14)

10 SS1300 & SS1700 Table of Contents Index Great Plains Manufacturing, Inc.
596-086M Table of Contents Index 06/14/2012
Description of Unit
The Sub-Soiler Inline Ripper SS1300 & SS1700 is a one-
section machine. It is designed to break up soil crust on
hard dried fields while eliminating compaction layers. An
optional berm conditioner may be added to the rear of
each shank.
Document Family
Using This Manual
This manual will familiarize you with
safety, assembly, operation, adjust-
ments, troubleshooting, and mainte-
nance. Read this manual and follow
the recommendations to help
ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 2
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located as shown in Figure 2.
Record your SS1300-SS1700 Sub-Soiler model and
serial number here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
If you are still unsatisfied, seek out the owner or general
manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
(800)255-9215
596-086M Operator Manual (this document)
596-086P Parts Manual
U
D
F
B
L
R
Figure 2
Serial Number Plate
42779