Troubleshooting – Great Plains SS1700 Operator Manual User Manual
Page 25
Advertising
06/14/2012
596-086M
Great Plains Manufacturing, Inc.
21
Troubleshooting
Problem
Cause
Solution
Excessive blowout
Going too fast.
Slow down.
Ripping too shallow.
Raise guage wheel.
Coulter not deep enough.
Lower coulter, see “Coulter
Height”,
Shank not aligned with coulter.
Align shank with trench made by
coulter, see “Coulter Alignment”,
Advertising
This manual is related to the following products: