Great Plains SS1700 Operator Manual - Manual (Page 27)

Great Plains Manufacturing, Inc. Table of Contents Index Maintenance and Lubrication 23
06/14/2012 Table of Contents Index 596-086M
Lubrication
Shank Pivot Arms
1 zerk on each shank pivot arm.;
Type of Lubrication: Grease
Quantity: Until grease emerges.
Wheel Bearings
One on each guage wheel.
Type of Lubrication: Grease
Quantity: Pump grease into bearings until resistance is
felt, being careful not to pressurize seal or blow out cap.
Coulter Swing Arms
1 zerk on each hub;
Type of Lubrication: Grease
Quantity: Until grease emerges.
Coulter Hubs
1 zerk on each hub;
Type of Lubrication: Grease
Quantity: Pump grease until resistance is felt, being care-
ful not pressurize seal or blow out cap.
8
50 Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube
Intervals (service hours)
at which lubrication is
required
41618
Seasonally
8
Seasonally
41730
41672
41672