Tongue to fertilizer/accessory sub-frame, Route hoses, Route cables – Great Plains YP825A Operator Manual User Manual

Page 161: Raise planter

Advertising
background image

Great Plains Manufacturing, Inc.

Table of Contents

Index

Appendix B - Pre-Delivery

157

2014-08-15

Table of Contents

Index

401-651M

Tongue to Fertilizer/Accessory Sub-frame

If the planter does not have Fertilizer or forward
sub-frame option, start above at “Tongue to Main Tool
Bar
” on page 156.

Refer to Figure 137
4.

Select one of new:

401-665L TONGUE ASSEMBLY YP4, 6 & 8

5.

Remove and save eight (8) sets of:

803-181C NUT HEX FLANGE LOCK 3/4-10 PLT

and four (4):

806-102C U-BOLT 3/4-10 CORNER 7 SQ

6.

Center the tongue

on the sub-frame

. Insert

U-bolts

from above and secure with lock nuts

.

Route Hoses

Leave the parking jack on tongue during hose routing, to
assure leaving adequate clearance around the stob

.

9.

Loosen or remove the hose clamps

.

10. Identify the lift cylinder hoses. Route them around

the jack stob

and under the bottom clamps.

11. Identify the marker hoses (if markers are installed).

Route them under the next higher clamp layer.

12. Identify the fan hoses. Route the pressure side and

return line hoses under the next layer of clamp.

13. Route the fan case drain line hose under the next

layer of clamp, or along the top to the hose bundles.

14. Tighten the fasteners that secure the clamps. Do not

use chart torque for the thread size. Use just enough
torque to keep hoses from moving, and keep
fasteners from coming lose.

Route Cables

15. Route the lighting and monitor cables along the hose

bundles.

16. Secure the entire bundle aft of the jack (location

)

with a large tie wrap.

17. Secure the remaining length with small tie wraps.

18. Move the parking jack to the operating position

.

Elevate tongue to level planter.

Raise Planter

19. Hoist or jack up tongue high enough to permit

attachment of the parking jack at the front side stob.

20. Connect the lift hydraulics to a hydraulic source

(page 15).

21. Lift the planter and install transport locks (page 22).

Remove the shipping stands. They are returned to
Great Plains.

3

51

54

56

Figure 137

Tongue to Sub-frame

29868

51

54

56

51

3

56

54

4

5

4

6

7

5

Figure 138

Tongue to Mainframe

29868

5

4

6

7

Advertising
This manual is related to the following products: