ADS Environmental Services FlowShark HV QR 775005 A2 - Manual (Page 15)

ADS FlowShark HV O&M Manual 15
Modifying the Parameter Settings
The lower level screens provide access to parameter settings that may be modified to
provide additional information, compensate for flow conditions, support associated
hardware, and address other relevant issues involved in velocity measurement
activities. The default parameters are set for the FlowShark HV at the factory. Under
normal conditions, it should not be necessary to access or modify the parameter
settings on the control unit.
Warning! Making changes to the parameter settings requires a
comprehensive understanding of the equipment and settings because it can
have a significant impact on the outcome and accuracy of the velocity
measurements. Therefore, please contact a regional ADS representative for
assistance before setting or modifying any parameters on the FlowShark HV.