ADS Environmental Services XiLog+ QR 775026 A0 - Manual (Page 31)

ADS XiLog+ System User Manual
25
From Last Readback
Choosing this radio button ensures PrimeWorks collects only the data
recorded by the logger since the last readback was performed.
Note: Clicking on the Quick Readback button on the title bar or the
Readback button corresponding to a logger in the Connected
Loggers drop-down list accomplishes the same operation as selecting
the From Last Readback option.
All Data
Choosing this radio button ensures PrimeWorks collects all the data available
in the logger to the PC. If several months of data are available in the logger,
this process may take several minutes.
Custom Dates
Choosing this radio button ensures PrimeWorks collects data from the logger
for the range indicated in the From and To fields. Selecting this option
enables the From/To calendar options. Designate the start and end dates of
the data for readback from these fields. The dates available for selection are
limited to the dates for which data is available in the logger.
Channels to Readback
(applicable only when collecting data remotely) Select the checkboxes
corresponding to the channels representing the data desired for readback. The
list contains only the channels that are available for readback.
After selecting the readback options and clicking on the Readback button,
PrimeWorks initiates the readback process and displays the progress on
screen. When performing a readback via USB, PrimeWorks calculates and
displays the estimated time of completion.
Save Configuration
Selecting this option saves the current configuration for the selected logger to
the PrimeWorks database.
Note: Selecting the program or readback options automatically saves
the configuration.