ADS Environmental Services XiLog+ QR 775026 A0 - Manual (Page 61)

ADS XiLog+ System User Manual
55
7. Feed the battery cable from the new battery through the hole in the
battery holder.
8. Place and properly position the battery into the holder.
9. Insert the battery holder back into the XiLog+, and secure it with the
two screws.
10. Connect the battery cable to the circuit board.
11. Slide the circuit board into the rails inside the housing.
12. Place the yellow cover back onto the XiLog+ and into position.
13. Turn the yellow cover clockwise 1/8 of a turn.