ADS Environmental Services XiLog+ QR 775026 A0 - Manual (Page 68)

ADS XiLog+ System User Manual
62
Appendix A: XiLog+ FastTrack Software
The XiLog+ FastTrack software primarily is designed for expediting the
process of programming the logger, viewing the current logger configuration,
and testing the signal strength. Although the PrimeWorks configuration
process is much more comprehensive, FastTrack represents an efficient and
effective alternative for deploying and/or testing the logger quickly in the
field.
Note: The XiLog+ FastTrack software does not support XiLog+
models 2 or 9.
To perform any or all of these tasks, first launch the FastTrack software
(provided it has been previously installed on the computer) by clicking on the
icon on the Windows desktop or selecting All Programs > Primayer >
XiLog+ FastTrack > XiLog+ FastTrack from the Windows Start menu.
Then, connect the XiLog+ to the computer using the yellow communication
cable (ADS part number NXG-881-001). The FastTrack software will
display the current serial number and phone number (when applicable). It also
will display other settings based on the last time the software was run.
XiLog+ FastTrack software