Attaching the extension arm – Amico AHM Monitor Arms (Adjustable Height) User Manual
Page 23
Advertising
www.amico.com
20
Attaching the Extension Arm
NOTE:
Extension arms are normally shipped assembled with the AHM arms.
If the extension arm is not assembled,
please follow the instructions below to attach the extension arm before mounting.
1. Assemble the AHM arm extension in the following order from the top down:
1/2’’ bolt, bronze washer, bracket arm,
metal washer in upper washer groove, AHM arm between the bracket, metal washer in lower washer groove, bracket
arm, bronze washer, retaining nut
(Figure 1)
2. Cover the exposed nut and bolt with plastic caps
(Figure 2)
Section 4: Adjustments
(Figure 2)
Plastic Caps
(Figure 1)
Extension arm
Metal washer
Bronze washer
AHM arm
Metal washer
Bronze washer
Retaining nut
Bracket arm
bracket arm
1/2" bolt
Advertising