Amico AHM Monitor Arms (Adjustable Height) - Manual (Page 26)

23 Amico Accessories
Cable Management: AHM Arm
NOTE: A cable guide is provided to facilitate routing of cables along the bottom of the arm.
NOTE: Longer cable guides are provided for arms with extensions. Guides also snap into grooves on the bottom of
extension arms.
1. Squeeze the cable guide until its edges snap into the bottom surface grooves of the arm. If you encounter difficulty,
you may use a flathead screwdriver to force the cable guide into the groove. Leave some extra cable loose at the
front and rear of the arm to prevent cable binding, connector damage, or cable guide damage (See figure 1-3) .
(Figure 1)
Grooves
Bottom side of the AHM Arm
(Figure 3)
Cable Cover
Cable Guide
Cable Guide
Bottom side of the AHM Arm
Edge
(Figure 2)
Cable Cover
Edge
Section 4: Adjustments