Amico AHM Monitor Arms (Adjustable Height) - Manual (Page 9)

www.amico.com 6
Mounting to the VRS (Vertical Rail System)
and the Ohmeda Rail
WARNING: Both adapters must be sitting in the rail securely.
WARNING: To prevent the adapter from falling down the channel ensure that the screw knobs are fastened to the
tightest possible position. After the installation, rotate the AHM arm side to side to verify that no movement is present
between the adapters and the rail.
WARNING: Please be sure to fasten the nuts to the screw knobs since screw knobs alone are not safe to hold the
weight of the monitor (Figure 3 and 6) .
NOTE: On the side of the V-adapter and the D-adapter there are screw knobs that lock the adapter into the rail once
secured. When you turn the knob counter-clockwise the side of the adapter moves outwards, putting the adapter
into an unlocked position
(Figure 1, 4). When the knob is turned clock-wise the side of the adapter moves inwards,
putting the adapter into a locked position (Figure 2 and 5).
V-adapter for the VRS: Sliver adapter (Figure 1 to 3)
D-adapter for the Ohmeda rail: Black adapter (Figure 4 to 6)
(Figure 1)
Locked
Slide inwards
Screw knob
Unlocked
Slide outwards
Screw knob
(Figure 2)
Opposite side of the V-adapter
(Figure 3)
Locked
Side inwards
Screw knob
(Figure 4)
Unlocked
Screw knob
Side outwards
(Figure 5)
Opposite side of the D-adapter
(Figure 6)