Amico Nema 4 Master Alarm - Manual (Page 3)

www.amico.com 3
Area Display Module
2 in 1 Display Module
Compact Display Module
Master/NEMA 4 Status Module
Computer Interface Module
Closing the Frame Module Assembly
Annunciator Module 14
Noise Level Control
Control of Remote Alarm Buzzer
Steps to Re-Calibrate the Sensor from Area Module v4.0 15
Area, 2 in 1, Compact Display Module 15 - 19
PSI/kPa/ BAR selection
Inch Hg/kPa/BAR selections
Common Settings for Pressure and Vacuum
Setting Factory Default
Setting Gas Identification Switches
Chart of Gas Specific Settings of Dip-Switches
Master/NEMA 4 Status Module 19 - 21
Repeat Alarm
Signal Input Selection
Maintenance Mode
Troubleshooting Guide 22 - 24
Error Code Messages on the Display Module 24
Model Numbers 25 - 28
Area Alarm
Master Alarm
Compact Alarm
NEMA 4 Alarm
Compact Master Combination Alarm
2 in 1 Area Alarm
Spare Part Numbers 29 - 31