B&G H5000 Analogue Expansion - Manual (Page 57)

|
57
Maintenance | H5000 Installation
Maintenance
General maintenance
The instruments are not user repairable and the operator is therefore
required to perform only a very limited amount of preventive
maintenance.
If the unit requires any form of cleaning, use fresh water and a
mild soap solution (not a detergent). It is important to avoid using
chemical cleaners, alcohols and hydrocarbons such as diesel, petrol
etc. Always put on the weather cover when the unit is not in use.
Checking the keys
Make sure that no keys are stuck in the down position.
Checking the connectors
The connectors should be checked by visual inspection only. Ensure
that cables are connected correctly and any unused terminals are
protected.
Software upgrade
To fi nd out the latest version of software available for your device go
to the B&G website www.bandg.com
12