B&G Triton Display - Manual (Page 60)

58 |
Autopilot Setup | Triton Operation Manual
The Minimum wind angle applies for the tack-prevent function. It also applies when the
autopilot is operating in WindNAV mode.
You can select different minimum wind angles for port and starboard. The difference between
port and starboard will be taken into account when calculating the Distance To Turn (DTT).
Range Change per step Default Units
15 - 90 1 30 º
Navigation change limit
In Navigation mode, when the required course change to next waypoint in a route is more
than the set limit, you are prompted to verify that the upcoming course change is acceptable.
The limit is adjustable.
¼ Note: Nav change limit screen can also be reached from the Nav mode main screen by
pressing the ‘Menu’ key followed by the ‘Mode’ key within 2 seconds.
Range Change per step Default Units
10 - 30 10 10 º
Reset
Resets the Pilot to factory settings.
Warning: all previous Pilot settings will be lost! Before engaging the
Pilot the commissioning and calibration process must be completed.