B&G Triton Display - Manual (Page 61)

| 59
Maintenance | Triton Operation Manual
Maintenance
General maintenance
The instruments are repair by replacement units, and the operator is therefore required to
perform only a very limited amount of preventive maintenance.
If the unit requires any form of cleaning, use fresh water and a mild soap solution (not a
detergent). It is important to avoid using chemical cleaners and hydrocarbons such as diesel,
petrol etc.
Always put on the weather cover when the unit is not in use.
Checking the keys
Make sure that no keys are stuck in the down position.
Checking the connectors
The connectors should be checked by visual inspection only. Ensure that cables are
connected correctly and any unused terminals are protected.
Software upgrade
To find out the latest version of software available for your display go to the B&G website
www.bandg.com
To verify what software you are currently running go to the software information page on
your display.
5