B&G Network Pilot - Manual (Page 11)

11
MEMORISING THE NEW COURSE
• Press AUTO key once to store the new course in the
autopilot course memory.
NOTE
It is suggested that this carried out after every permanent
course change, i.e. not when you have just steered around
an obstacle.
RETURNING TO THE PREVIOUS COURSE
• Press the AUTO key twice within 4 seconds to return to
the previous MEMorised course shown in the LCD text
window.
NOTE
If you have used the course memory after every permanent
course change then the autopilot will steer the boat back on
to your last autopilot course. If not, the autopilot will steer on
to the last course that was memorised. Check that the
MEMorised course in the LCD text window is the one that
you want.