B&G Network Pilot - Manual (Page 18)

18
CHANGING COURSE
• Press <10 or <1 to alter course to port in 10
0 or 1 0
increments.
• Press 10> or 1> to alter course to starboard in 10
0 or 1 0
increments.
• NAV OFF and XTE are shown alternatively in the LCD
text window.
NOTE
When a course change is made Steer to NAV is temporarily
disabled until the autopilot is instructed to return to the
previous course. The autopilot will continue to steer the
current compass course.
RETURNING TO THE PREVIOUS COURSE
• Press the AUTO key twice within 4 seconds to return to
the previous NAV autopilot course.