B&G Network Pilot - Manual (Page 5)

5
NETWORK PILOT HAND-HELD CONTROLLER
The Handheld Controller provides remote control of the
Network PILOT. The six keys give the same control functions
as the six large keys on the Network PILOT display unit.
< 10
0
> 10 0 course change
< 1
0
> 1
0
course change
auto/resume
PILOT engage and return to course
off
PILOT disengage
In the centre of the handheld controller is an LED that will
flash the coded sequences shown in the table above.
Standby _ _ _
Pilot Engaged ________
Course Change ____ ____
Commissioning _ _ _ _ _
Compass Cal. _ ___ _ __
Fault __ __ __
Man Overboard _ _ _ _ _ _