B&G Network Pilot - Manual (Page 9)

9
ENGAGING PILOT ON CURRENT COURSE
• If necessary, press the MODE key to select COMPass.
• Press the AUTO key once to engage the autopilot on the
current course.
NOTE
The Network PILOT has a Course Memory, the previous
autopilot course is stored in it when the autopilot is
disengaged for future use. The previous autopilot course is
displayed for 4 seconds in the LCD text area, this is recalled
from the autopilot Course Memory.
DISENGAGING THE PILOT
• Press the OFF key to disengage the autopilot.
• The previous autopilot course is MEMorised.
NOTE
The previous autopilot course is always stored in the course
memory when the autopilot is disengaged.