B&G Network Pilot - Manual (Page 46)

46
TROUBLE SHOOTING GUIDE
ERROR MESSAGES
The Control Unit is continually monitoring the Network Pilot and
Network System for correct operation. If an error is detected the
Network Pilot Display will show an error message, the Hand-held
Controller status LED will flash the error pattern, and the system alarm
buzzers will sound.
• To cancel alarm buzzer, press any of the five lower keys on any
Network Pilot Display unit, or in an integrated system any of the five
lower keys on any Network display except the Network WIND and
Network TACK units.
• Press the DISPLAY key on any Network Pilot Display to cancel the
displayed error message.
• Persistent errors should always be checked by an authorised B&G
service dealer.