Baseline Systems BaseStation 1000 - Manual (Page 10)

BaseStation 1000 Quick Start Guide
Page 4
STEP 3 – Set the Date and Time on the Controller
Press the System Setup button. Highlight the Time
& Date Setup option, and then press OK.
Change all the fields to reflect the current time and
date.
Note: If the controller is connected to BaseManager
2.0, the time will be automatically set by the server.
STEP 4 – Set Zone Runtimes
Press the Program Setup button. Highlight the Zone Runtimes option, and then press OK.
Verify that the correct program number displays in
the upper-left corner. Press PRG to change if
necessary.
Press the  or  button to move to the zone that
you want to set the runtime for. Press the  or 
button to move to the digits that you want to
change. Press the + or – button to change the time.
STEP 5 – Set Watering Start Conditions
A program is not active until you select a start condition for it.
Press the Program Setup button. Highlight the Setup Prg. Start option, and then press OK. For the
initial system configuration, we recommend that you set up a Day & Time Start. After you verify
that your system is watering as expected, you can add other start conditions or switch to a
different start condition.
Verify that the correct program number displays in the upper-left corner. Press PRG to change if
necessary.
Press the  button to highlight the Day & Time Start option, and then press the + button to select
the option. Press the OK button to go to the next menu level.
Press the  button to highlight the Set Start Days option, and then press the OK button to go to
the Set Start Days screen.
Again, for the initial system configuration, we
recommend that you set up the Weekday option.
After you verify your system is watering as
expected, you can change to another start day
option.