Baseline Systems BaseStation 1000 - Manual (Page 18)

BaseStation 1000 Quick Start Guide
Page 12
Test Menu
The BaseStation 1000 has the following features for testing zones, valves, biCoders and biSensors.
These tests help you isolate and identify components and devices that are not working properly so
you know what needs to be repaired.
Test Zone
Test MV/Pump
Test Moisture Sensor
Test Flow Sensor
Test Event Switch
Test Temp. Sensor
Test Two-Wire
Test All Devices
System Setup Menu
Time & Date Setup
Set or change the controller date and time to match the current date and time.
Network Setup Menu
Ethernet Setup
Enable the Dynamic Host Configuration Protocol (DHCP) or a static IP address to establish the
Internet connection from your controller.
Ethernet Info
Displays the status of your Ethernet connection and the network IDs that were automatically
assigned to your controller.
BaseManager Setup
Enable the BaseManager connection so you can use LiveView to remotely operate your
controller.
BaseManager Info
Displays the status of your BaseManager connection and allows you to connect.