Baseline Systems BaseStation 1000 - Manual (Page 9)

BaseStation 1000 Quick Start Guide
Page 3
Understanding Zone Statuses
The following icons identify the status of the zones:
Icon Status Description
Unassigned The zone does not have a biCoder assigned to it
Done The complete cycle has finished for this zone – including watering
and soaking
Waiting The zone is scheduled to run, but currently it is not watering or
soaking
Watering Watering is in progress
Soaking The zone has watered and is now soaking
Paused A pause condition is in effect for this zone
Disabled The zone is marked as being disabled
Message There is a message associated with this zone
Quick Start Your Controller
These instructions walk you through the basic steps for getting your controller configured for
watering. Refer to the User Manual for complete instructions for all of the controller’s features.
STEP 1 – Install and Connect Devices
Install all of your irrigation devices and connect them to the controller according to the instructions
that came with the devices.
STEP 2 – Search For and Assign Devices
Press the Search & Assign button on the controller
and go through each option to find the devices that
you connected to the controller. Assign biCoders to
zone numbers and other devices to their ID
numbers.