Baseline Systems BaseStation 1000 - Manual (Page 7)

BaseStation 1000 Quick Start Guide
Page 1
Introduction
Congratulations on purchasing the BaseStation 1000 – a smart irrigation controller designed to
provide the features that are essential for intelligent watering.
This quick start guide helps you get familiar with the BaseStation 1000 interface and the buttons on
the front panel. It walks you through the basic steps for getting your controller configured for
watering. Keep in mind that this guide is intended as a basic overview of the setup – you will find
complete instructions for all of the controller’s features in the User Manual.
This quick start also includes a structured list of all menus and options in the controller along with a
brief description of those options.
Controller Front Panel Layout
Display – The display indicates the current state of the controller and is used to program the
controller. Refer to Setting Up the Screen Display in the User Manual for information about
improving image quality in outdoor conditions including direct sunlight and low light.
Main Menu Buttons – The buttons are used to select the various operating or programming menus
of the controller. An indicator light glows on the button for the menu that is active.
Buttons – The buttons are used to select programming elements, change their values, and initiate
operations like testing a zone.
ENG/ESP Switch between the English and the Spanish interface on the controller