Baseline Systems BaseStation 1000 - Manual (Page 12)

BaseStation 1000 Quick Start Guide
Page 6
If Soak Cycles are set to Off, press the + button to replace that setting with a number. Press the + or
– button to set the appropriate number of soak cycles.
Press the  button to move to the Soak Time field and then press the  button to move to the
digits that you want to change. Press the + or – button to set the time.
Press the  button to highlight the Intelligent Soak field. If you want to enable Intelligent Soak for
this program, press the OK button to display a checkmark in the field.
When you enable the Intelligent Soak™ feature, the BaseStation 1000 uses intelligent watering
algorithms that apply cycles in the optimal order to maximize water penetration and minimize
evaporation loss. If there are many zones in a program, zones will be cycled and soaked until all
have been completed. Zones that have completed their soak cycles are prioritized higher that
zones that are still waiting to water so the first zones to start watering will be the first to complete.
STEP 8 – Set the Controller to RUN
Press the RUN button to put the controller in the Run menu. Watering will start when the next start
day and time is reached.
If you want to manually start a program, press the MANUAL RUN button. Press the  button to
highlight the Start/Stop Program option.
If the program is idle, the Start? option displays on
the right side of the screen. To start the program,
highlight the Start? option, and then press the OK
button. The label to the right of the program
number changes to “Running.”
If the program is running, the Stop? option displays
on the right side of the screen. To stop the
program, highlight the Stop? option, and then
press the OK button. The label to the right of the program number changes to “Done.”
BaseStation 1000 Menus and Options
This section is a structured list of all menus and options in the controller along with a brief
description of those options. Refer to this list when you want to know where an option is located or
when you find an option and want to know what it does.
Run Menu
Zone Status
The Zone Status report displays when the Run menu is active. Refer to the User Manual or the On-
Screen Help for a description of the zone statuses.
When the Zone Status report is displayed, you can press the BACK button to display the Status
Report menu. The following options are available: