Bio-Rad Gel Doc™ XR+ System User Manual
Page 30
30
4.6 Installing the Optional 17 mm or 25 mm Wide-Angle Lenses
(ChemiDoc XRS System only)
This installation guide covers installation of the optional lenses for the ChemiDoc XRS system. The
following catalog numbers are covered under this category:
a. Lens f 0.95, 25 mm, wide-angle
b. Lens f 0.95, 17 mm, wide-angle
The lens kit includes a lens and the light seal adaptor ring. See pictures below:
Setting Up the Lens:
1. Turn off the power to the enclosure and camera.
2. Disconnect the camera and lens cables.
3. Remove the ChemiDoc XRS camera from the bracket.
4. Remove the existing motorized zoom lens from the camera by turning the lens counterclockwise.
Attach the 25 mm or 17 mm lens to the camera as shown below:
Remove existing motorized zoom lens
Install the wide angle lens
17 mm wide-angle lens with
light seal adaptor
25 mm wide-angle lens with
light seal adaptor