Bio-Rad Gel Doc™ XR+ System - Manual (Page 31)

31
5. The wide-angle lenses come with an adapter. See picture below.
6. Place the adapter ring on the mounting plate.
7. Position the camera lens assembly on the adapter ring while sliding the thumb screw through the
slot on the camera bracket. Before tightening the screw, make sure that the wide-angle lens is
seated on the gasket of the adapter ring, and that the back of the camera closely faces the camera
bracket.
8. Tighten thumb screw. See pictures below:
Make sure that the lens is seated properly on the gasket in the adapter.