Bio-Rad Gel Doc™ XR+ System - Manual (Page 35)

35
Lens and Light Source Control Through the Computer
The functions described in the previous paragraphs can also be performed through the PC. The attached
screen shot as applied to Gel Doc XRS is self-explanatory.
Filters:
A +1 diopter is factory installed on the lens. This diopter should always remain on the lens
assembly. A 580AF120 Ethidium Bromide filter is included in the accessory kit. Place this filter in
position 1 or 2 of the filter slider (see 4.2.1). The Ethidium Bromide filter should be used for fluorescence
(UV) and colorimetric (white light) applications.