Cooper Instruments & Systems LTL 730 Wireless Tension Link Load Cell - Manual (Page 25)

CF 150 LTL 730 22 12/08
A punch sized slightly smaller than the holes in the spacer may be helpful. The spacers should “sandwich” the
dynamometer body, but should not be drawn completely tight.
Remove the four large circular foam plugs from the carry case and it can continue to be used with the spacers
attached.
11.0 COMMON CONFIGURATIONS
LTL 730 being used stand-alone (no RS-232 or Communicator remote)
Key Settings (LTL 730):
COM1 Trans Level – Disabled
COM2 Trans Level – Disabled
LTL 730 connected to a computer
Key Settings (LTL 730):
COM1 Trans Level – Disabled
COM2 Trans Level – RS-232 (all other parameters should agree with peripheral such as baud, data bits &
parity)
Communicator connected to one LTL 730 by wire on CELL port
Key Settings (LTL 730 and Communicator):
COM1 Trans Level – Disabled
COM2 Trans Level – RS-485
Address: 1
Channel: 1
Communicator talking to one LTL 730 by radio
Key Settings (Communicator):
COM1 Trans Level – Disabled or RS-232
COM2 Trans Level – RF
Radio Channel (1-64): 1 (this must differ from all other Communicators in the area)
Number of LTL 730s in the network (1-15): 1
Address of LTL 730 1: 1
Key Settings (LTL 730):
COM1 Trans Level – Disabled
COM2 Trans Level – RF
Radio Channel (1-64): 1 (must match Communicator setting)
Network ID (1-15): 1
Network Identifier: (enter characters or digits to identify this specific LTL 730) (most useful if multiple LTL
730s are networked to one Communicator)
Communicator talking to four LTL 730s by radio
Key Settings (Communicator):
COM1 Trans Level – Disabled or RS-232
COM2 Trans Level – RF
Radio Channel (1-64): 1 (this must differ from all other Communicators in the area)
Number of LTL 730s in the Network (1-15): 4
Address of LTL 730 1: 1
Address of LTL 730 2: 2
Address of LTL 730 3: 3
Address of LTL 730 4: 4
Key Settings (LTL 730 1):
COM1 Trans Level – Disabled
COM2 Trans Level – RF
Radio Channel (1-64): 1 (must match Communicator setting)
Network ID (1-15): 1
Network Identifier: A