Cooper Instruments & Systems LTL 730 Wireless Tension Link Load Cell - Manual (Page 9)

CF 150 LTL 730 6 12/08
6.0 LTL 730 SETUP
To begin using the LTL 730, it is recommended that you set it up to suit your specific needs and equipment. You
can access the SETUP menu with the softkeys. Refer to section 11.0 for some common configurations.
Figure 4. Operator setup menu for the LTL 730
6.1 Setup Menu
Press the appropriate soft key shown in Figure 4 to accomplish the functions listed on the following pages.
Setup Ptfmt
Press the Ptfmt soft key to select the print format that will be sent to a peripheral printer when you press the
Print soft key. Choose from the formats below. Data sent is shown below. The default is format #1.
Format #1 Current displayed value (peak or live force) plus unit of measure
104.5 lbf (live force example)
302.5 lbf (peak force example)
104.5 lbf (dual mode example)
302.5 lbf
Format #2
Live force value plus unit of measure on 1st line
Same as
Communicator
Same as
Communicator
Name of
LTL 730