Yealink SIP-T20 - Manual (Page 80)

User Guide for the SIP-T20P/SIP-T20 IP Phone
68
The icon appears on the LCD screen and the prompt ―FWD:‖ appears in front of the
associate account.
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
To disable call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Press , select Features->Call Forward.
Press or to select the forwarding type, then press .
Press or to select Disable to disable the call forward.
Press to accept the change.
To disable call forward in custom mode for a specific account:
Do one of the following:
1. Press , select Features->Call Forward or press when the phone is idle.
2. Press or to select the desired account, then press .
3. Press or to select the desired forwarding type, then press .
4. Press or to select Disable to disable the call forward.
5. Press to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press .
You can also enter the SIP URL or IP address in the Forward To field. For more information
on using the SIP URL or IP address, refer to Placing Calls on page 53 .
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.
FWD: 1003
24 Jul 10:39