Yealink SIP-T20 - Manual (Page 30)

User Guide for the SIP-T20P/SIP-T20 IP Phone
18
3. Press or to select the desired language.
4. Press to accept the change.
Text displayed on the LCD screen will change to the selected language.
To change the language for web user interface:
1. Click on Settings->Preference.
2. Select the desired language from the pull-down list of Language.
3. Click Confirm to accept the change.
Text displayed on the web user interface will change to the selected language.
The time and date are displayed on the LCD screen when the phone is idle. If the phone
cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
you need to configure the time and date manually. For more information on the SNTP
server, contact your system administrator.
To configure the SNTP settings via phone user interface:
1. Press .
2. Select Settings->Basic->Time & Date->SNTP.
3. Press or to select the time zone that applies to your area from the Time
Zone field.
*1. English(English)
2. Français(French)