Yealink SIP-T20 - Manual (Page 93)

Advanced Phone Features
81
You can record calls by pressing a record key on the phone. The SIP-T20P/SIP-T20 IP
phone supports record and URL record.
Two ways of call recording:

Record: the phone sends SIP INFO message containing a specific header ―Record:
on/off‖ to trigger a recording.

URL Record: the phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
To configure a record key via phone user interface:
1. Press .
2. Select Features->DSS Keys.
3. Select the desired DSS key.
4. Press or to select Key Event from the Type field.
5. Press or to select Record from the Key Type field.
6. Press to accept the change.
To configure a URL record key via phone user interface:
1. Press .
2. Select Features->DSS Keys.
3. Select the desired DSS key.
4. Press or to select URL Record from the Type field.
5. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
6. Press to accept the change.
Record key or URL record key is configurable via web user interface at the path
Call record is not available on all servers. Contact your system administrator for more
information.
2. Key Type:
◄ Record ►
1. Type:
◄ URL Record ►