Dell OptiPlex 755 User Manual
Page 101
8.
When the message appears stating that memory size has changed, press <F1> to continue.
9.
Log on to your computer.
10.
Right-click the My Computer icon on your Windows desktop and click Properties.
11.
Click the General tab.
12.
To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Removing Memory
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see "Removing the Computer Cover" for your specific computer).
3.
Press out the securing clip at each end of the memory module connector.
4.
Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to remove it from the connector.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer chassis.