Dell OptiPlex 755 - Manual (Page 115)

6. Press in on the blue release tabs on each side of the drive and slide the drive up and out of the computer.
Installing a Hard Drive
1. Unpack the replacement hard drive, and prepare it for installation.
2. Check the documentation for the drive to verify that it is configured for your computer.
3. If your replacement hard drive does not have the plastic hard drive bracket attached, remove the bracket from the existing drive by unsnapping it from
the drive.
4. Snap the bracket onto the new drive.
1 data cable 2 hard drive system board connector 3 power cable
1 hard drive 2 release tabs (2)
1 hard drive 2 hard drive bracket