Optical drive – Dell OptiPlex 755 User Manual

Page 58

Advertising
background image

 

5.

Press the release tabs on the plastic insert and press from behind to remove.

 

Replacing Drive Inserts

If you are removing a drive, and need to replace the inserts:

 

1.

Place the plastic insert over the opening and press the insert tab down until the plastic insert snaps into place.

 

2.

Slide the metal bracket toward the front of the computer and click into place.

 

3.

Replace the computer cover (see

Replacing the Computer Cover

).

 

Optical Drive

 

 

 

Removing an Optical Drive

 

1.

Follow the procedures in

Before You Begin

.


 

2.

Remove the computer cover (see

Removing the Computer Cover

).

1 metal insert

1 shoulder screws 2 plastic drive insert

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

NOTE:

If you will be operating your computer without an optical drive or a 3.5-inch device (floppy drive or media card reader) installed, the appropriate

drive bay insert must be installed in place of the drive. Contact Dell if you need a drive bay insert. See

Removing Drive Inserts

.

Advertising