Cuisinart HFP-300 - Manual (Page 6)

6
2. Attach the food chamber assembly to
the motorized base. With the handle in
your right hand and holding the food
chamber at a 15° angle, line up the line
on the food chamber with the line on the
housing. The driving end of the assembly
must be fully inserted into the socket of
the motorized base. Next, while pushing
the food chamber assembly firmly in
toward the handle, rotate the assembly
counterclockwise until it is upright and
it is centered with the handle.
3. Plug cord in and load the food chamber.
For best results, it is important that the
food be prepared and properly placed
in the food chamber as follows:
• Cut food so that it will easily fit into the
feed tube.
• Stack food upright into the feed tube
for short pieces or vertically for longer
pieces.
4. Begin processing by pushing down the
switch and evenly pushing the food
down, using the pusher.
5. The processed food will be released from
the front of the unit, directly into your
bowl or platter.
USE AND CARE
1. Keep hands as well as spatulas and
other utensils away from moving drums
while processing food, to prevent the
possibility of severe personal injury or
damage to the food processor. A plastic
scraper may be used, but only when the
food processor motor is stopped.
2. Avoid contact with moving parts. Never
push food down into feed tube by hand
when slicing, shredding, or grating.
Always use pusher.
3. The exterior of the drums are sharp.
Store drums as you would other sharp
objects, out of reach of children.
2. Insert food chamber into base.
3. Twist food chamber on base to lock
position.