Loading and unloading film, Loading film – Canon eos rebel g User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading and Unloading Film
Loading Film
When a roll of film is loaded, the camera first winds the whole roll onto the
camera’s spool. Then each time a picture is taken and the frame
advances, one frame of film is rewound back into the film cartridge.
With
DX-coded
film,
the
camera
automatically
sets
the
film’s
ISO
speed.
• If the film is not DX-coded, set the ISO speed
manually. See ^Setting the ISO Speed" on
page 49.
1
Unlock the Command Dial.
Slide down the camera back lock-
release lever to open the camera
back.
Insert the film cartridge at an angle
as shown in the figure.
Infrared film cannot be used with this camera.
•
4%
w'
•
.JThe shutter curtain is manufactured with very
w high precision. To prevent damage, never
touch the shutter curtain. When loading or
Unloading film, be careful not to touch the
shutter curtain with your fingers or the film.
4