General operating tips, Manual heating and air conditioning system, 164 climate control – FORD 2013 Explorer v.1 User Manual

Page 164

Advertising
background image

GENERAL OPERATING TIPS

Manual Heating and Air Conditioning System
• To reduce fog build-up on the windshield during humid weather, select

Defrost. Temperature and/or fan speed can also be increased to
improve clearing.

• To reduce humidity build-up inside the vehicle, do not drive with the

system off or with recirculated air engaged.

• Do not put objects under the front seats that will interfere with the

airflow to the back seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

• To improve the A/C cool down, drive with the windows slightly open

for 2-3 minutes after start up or until the vehicle has been aired out.

• A small amount of air may be felt from the floor vent regardless of the

air distribution setting that is selected.

During extreme high ambient temperatures when idling stationary for
extended periods of time in gear, it is recommended to run the A/C in
the MAX A/C mode, adjust the blower fan speed to the lowest setting
and put the vehicle’s transmission into the P (Park) position (vehicles
equipped with an automatic transmission) to continue to receive cool air
from your A/C system.

For maximum cooling performance MAX A/C in AUTO, press MAX A/C.

1. Move temperature control to the coolest setting.

2. Set the fan to the highest speed initially, then adjust to maintain comfort.

For maximum cooling performance in panel or panel/floor modes:

1. Move temperature control to the coolest setting.

2. Select A/C and recirculated air to provide colder airflow.

3. Set the fan to the highest speed initially, then adjust to maintain comfort.

To aid in side window defogging/demisting in cold weather:

1. Select Floor/Panel.

2. Select A/C.

3. Adjust the temperature control to maintain comfort.

4. Set the fan speed to the highest setting.

5. Direct the outer instrument panel vents towards the side windows.

6. To increase airflow to the outer instrument panel vents, close the

vents located in the middle of the instrument panel.

164

Climate Control

2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising