Canceling a set speed, Resuming a set speed, Switching off cruise control – FORD 2013 Explorer v.1 User Manual

Page 254: Using adaptive cruise control (if equipped), Using adaptive cruise control, 254 cruise control

Advertising
background image

Canceling a Set Speed

Press CNCL or tap the brake pedal. The set speed will not be erased.

Resuming a Set Speed

Press and release RES.

Switching Off Cruise Control

Note: The set speed is erased when you switch off cruise control.

Press the OFF control down and release or turn off the ignition.

USING ADAPTIVE CRUISE CONTROL (IF EQUIPPED)

WARNING: Always pay close attention to changing road
conditions, especially when using adaptive cruise control.

Adaptive cruise control cannot replace attentive driving. Failing to
follow any of the warnings below or failing to pay attention to the road
may result in a collision, serious injury or death.

WARNING: Adaptive cruise control is not a collision warning or
avoidance system. Additionally, adaptive cruise control will not

detect:
• Stationary or slow moving vehicles below 6 mph (10 km/h).
• Pedestrians or objects in the roadway.
• Oncoming vehicles in the same lane.

WARNING: Do not use the adaptive cruise control when
entering or leaving a highway, in heavy traffic or on roads that

are winding, slippery or unpaved.

WARNING: Do not use in poor visibility, specifically fog, rain,
spray or snow.

Note: It is the driver’s responsibility to stay alert, drive safely and be in
control of the vehicle at all times.

The system is designed to automatically adjust your speed to maintain a
proper distance between you and the vehicle in front of you in the same
lane. The driver can select from one of four GAP settings, the controls
are located on the steering wheel.

254

Cruise Control

2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising