Trailer hitch cover, 290 towing – FORD 2013 Explorer v.1 User Manual

Page 290

Advertising
background image

Trailer Tow Connector (Vehicles Equipped with a Trailer Tow/Prep
Package)

The trailer tow connector is located under the rear bumper, on the
driver’s side of the vehicle.

Color

Function

1. Dark Green

Right turn signal/brake lamp/hazard flasher

2. Yellow

Left turn signal/brake lamp/hazard flasher

3. Brown

Tail lamps/parking lamps

4. White

Ground

Trailer hitch cover

Your vehicle is equipped with a removable trailer hitch trim cover. To
remove the trim cover:

1. Loosen the two

1

4

-turn fasteners

(A) in the bottom of the cover by
turning them counterclockwise. Pull
the cover rearward to remove it; the
fasteners will remain attached to the
cover.

2. To reinstall the cover, insert the
four plastic tabs on top of the cover
into the corresponding slots (B),
and push the cover into the bumper
trim.

3. Hold the cover against the bumper trim and reinstall the two

1

4

-turn

fasteners by turning them clockwise.

A

A

B B

B

B

290

Towing

2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising