Trailer brakes, Trailer lamps, Driving while you tow – FORD 2011 Edge v.2 User Manual

Page 232: Tires, wheels and loading

Advertising
background image

Trailer brakes

Be sure your trailer conforms to all applicable local and Federal
regulations regarding trailer braking. If your trailer is equipped with
electronically-controlled brakes you will need to have an electronic brake
controller with associated wiring installed to your vehicle by an
authorized dealer.

WARNING: Do not connect a trailer’s hydraulic brake system
directly to your vehicle’s brake system. Your vehicle may not

have enough braking power and your chances of having a collision
greatly increase.

The braking system of the tow vehicle is rated for operation at the
GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working.

Do not splice into the vehicle lamp wiring for trailer lamps. Your
vehicle uses an advanced electronic module to control and
monitor your vehicle lamps. Splicing into the wiring or attaching
wiring to the vehicle bulb may DISABLE the rear vehicle lamps or
cause them not to function properly. Your lamp outage feature
may also be disabled or provide incorrect information.

Driving while you tow

When towing a trailer:
• Do not drive faster than 70 mph (113 km/h) during the first 500 miles

(800 km) of trailer towing and don’t make full-throttle starts.

• Turn off the speed control. The speed control may shut off

automatically when you are towing on long, steep grades.

• Use a lower gear to eliminate excessive shifting and assist in

transmission cooling. For additional information, refer to Automatic
transmission operation
in the Driving chapter.

• Allow more distance for stopping with a trailer attached; anticipate

stops and brake gradually.

Tires, Wheels and Loading

232

2011 Edge (edg)
Owners Guide, 2nd Printing
USA
(fus)

Advertising