High beams, Flash-to-pass, Daytime running lamps (drl) (if equipped) – FORD 2011 Edge v.2 User Manual

Page 71: Lights

Advertising
background image

3. Rotate the headlamp control to the off position.

4. Turn the vehicle on.

5. Turn the vehicle off.

6. Turn the headlamp control to the autolamp position (the headlights
should turn on).

7. Turn the headlamp control to the off position when the desired delay
time (up to three minutes) has been reached.

High beams

Pull the lever fully past the detent
to activate. Pull the lever fully again
to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on at reduced intensity output. To activate:
• the ignition must be in the on position and
• the headlamp control must be in the off, autolamps or parking lamps

position.

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

Lights

71

2011 Edge (edg)
Owners Guide, 2nd Printing
USA
(fus)

Advertising