Settings, Instrument cluster – FORD 2011 Edge v.2 User Manual
Page 36
To determine your average highway fuel economy, do the following:
1. Drive the vehicle at least 5 miles (8 km) with the speed control
system engaged to display a stabilized average.
2. Record the highway fuel economy for future reference.
It is important to reset fuel economy after setting the speed control to
get accurate highway fuel economy readings.
For more information refer to Essentials of good fuel economy in the
Maintenance and Specifications chapter.
Settings
In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:
Note: Some items are optional and may not appear.
Driver Assist
Traction Control
On (default setting) / Off
Blind Spot
On (default on key cycle) / Off
Collision Warning Sensitivity
(if MyKey™ is
programmed)
High / Normal / Low
Chimes
On (default on key cycle) / Off
Warn-<ON>
On (default on key cycle) / Off
Cross Traffic
Alert
On (default on key cycle) / Off
Cruise Control
Adaptive or Normal
Rear Park Aid
On (default on key cycle) / Off
Trailer Sway
On (default on key cycle) / Off
Vehicle
Autolamp Delay
Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds
Easy Entry/Exit
On (default on key cycle) / Off
Fuel
DTE Calculation
Normal, Towing
Long Term Econ
Hold OK to Reset...
Instrument Cluster
36
2011 Edge (edg)
Owners Guide, 2nd Printing
USA (fus)