NISSAN 2012 Armada - Owner's Manual User Manual
Page 416
Advertising
2. Open the glove box, then remove the three
upper glove box screws. Remove the glove
box assembly from the instrument panel to
access the in-cabin microfilter cover.
3. Remove the filter cover bolt and remove the
filter cover.
NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.
4. Insert the first filter into the housing and slide
it over to the right. Insert the second filter
into the housing.
5. Replace the filter cover.
6. Install the glove box assembly.
7. Fill out the date information on the small
replacement label and attach it to the glove
box lid.
WDI0623
LDI0387
LDI0404
Maintenance and do-it-yourself
8-19
Advertising
This manual is related to the following products: