NISSAN 2012 Armada - Owner's Manual - Manual (Page 470)

To install the electric trailer brake controller
jumper harness, perform the following proce-
dure:
1. Open the driver door. Move the seat to the
rearmost position.
2. Apply the parking brake to access the
jumper harness connector.
3. Locate the jumper harness connector under
the lower portion of the instrument panel.
The connector is taped to the wiring harness
᭺
1 as indicated.
● The connector is marked with a white tag
with “elec brake conn”.
LTI0122 LTI0115
Technical and consumer information 9-27