NISSAN 2012 Armada - Owner's Manual User Manual

Page 468

Advertising
background image

CAUTION

Special hitches which include frame re-

inforcements are required for towing
above 2,000 lb (907 kg). Suitable genu-
ine NISSAN hitches, ball mounts and
hitch balls for pickup trucks and sport
utility

vehicles

are

available

at

a

NISSAN dealer.

The hitch should not be attached to or

affect the operation of the impact-
absorbing bumper.

Do not use axle-mounted hitches.
Do not modify the vehicle exhaust sys-

tem, brake system, etc. to install a
trailer hitch.

To reduce the possibility of additional

damage if your vehicle is struck from
the rear, where practical, remove the
receiver when not in use.

Regularly check that all trailer hitch

mounting bolts are securely mounted.

Tire pressures

● When towing a trailer, inflate the ve-

hicle tires to the recommended cold
tire pressure indicated on the tire
placard.

● Trailer tire condition, size, load rating

and proper inflation pressure should
be in accordance with the trailer and
tire manufacturer’s specifications.

Safety chains

Always use suitable safety chains between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. The safety
chains can be attached to the bumper if the hitch
ball is mounted to the bumper. Be sure to leave
enough slack in the chains to permit turning
corners.

Trailer lights

CAUTION

When splicing into the vehicle electrical
system, a commercially available power-
type module/converter must be used to
provide power for all trailer lighting. This
unit uses the vehicle battery as a direct
power source for all trailer lights while
using the vehicle tail light, stoplight and
turn signal circuits as a signal source. The
module/converter must draw no more
that 15 milliamps from the stop and tail
lamp circuits. Using a module/converter
that exceeds these power requirements
may damage the vehicle’s electrical sys-
tem. See a reputable trailer dealer to ob-
tain the proper equipment and to have it
installed.

Trailer lights should comply with federal and/or
local regulations. For assistance in hooking up
trailer lights, contact a NISSAN dealer or repu-
table trailer dealer. Vehicles equipped with the
optional trailer tow package are equipped with a
7-pin trailer harness connector. If your trailer is
equipped with a flat 4-pin connector, an adapter
will be needed to connect the trailer lights to the
vehicle. Adapters are available at NISSAN dealers
as well as auto parts stores and hitch retailers.

Technical and consumer information

9-25

Advertising
This manual is related to the following products: