Installing front license plate -13 – NISSAN 2012 Armada - Owner's Manual User Manual

Page 456

Advertising
background image

TIRE AND LOADING INFORMATION
LABEL

The cold tire pressure is shown on the Tire and
Loading Information label. The label is located as
shown.

AIR CONDITIONER SPECIFICATION
LABEL

The air conditioner specification label is affixed to
the underside of the hood as shown.

Use the following steps to mount the front license
plate:

1. Make holes on the plastic finisher at the

location mark (small dimple) using a 0.20 in
(5 mm) drill. Apply light pressure to the drill.
Install the license plate holder using the two
screws provided with the holder.

2. Mount the license plate using two M6-

14mm bolts.

License plate bolt tightening torque:

3.8 - 4.7 ft-lb (5.10 - 6.37 N·m)

WTI0100

WTI0220

LTI0093

INSTALLING FRONT LICENSE PLATE

Technical and consumer information

9-13

Advertising
This manual is related to the following products: